Shower Installation Demystified - A Complete Guide For New Units

Schedule Services



We've discovered this post about How to Install a Shower Enclosure directly below on the web and believe it made sense to write about it with you on my blog.


How to Install a Direct-to-Stud Shower Enclosure
A successful shower installation requires cautious planning and a lot of work. In many cases, you will need to do three types of tasks: framing walls, installing the plumbing, and ending up wall surfaces.

Prep work


To start with, you have to select the kind of shower that you want to set up. It is essential to determine whether the chosen shower can managing specific systems and can regulate a safe degree of water via the central heating boiler. Most shower units nowadays are developed to be flexible to different water pressures (such as stored hot water and cold mains).
It is also crucial to take into consideration the water pressure and the planning of the piping and drainage for the shower

Different Types of Shower Units


  • Push-on Mixer: The hose and spray parts of the push-on mixer shower device can be attached to the bathroom faucet according to your demand, as well as the water temperature can be adjusted using the taps. Push-on mixers are cheap and extremely straightforward to install. Nevertheless, although the pipe link is straightforward, it is conveniently displaced. In addition, it is bothersome to readjust the temperature level.

  • Bath/Shower Mixer: The pipe as well as spray of this kind of shower are integrated with a bath mixer tap, and the temperature can be readjusted via the bathroom faucets. It is a really economical choice as well as no additional plumbing is involved. However, the bath/shower mixers also deal with bothersome temperature level control choices.

  • Handbook Mixer: The hose pipe and also spray of a hands-on mixer shower system are a part of the wall surface device as well as the hot and cold water supplies are attached to a solitary valve The temperature and also pressure of the water are controlled via either one or a range of knobs (in more pricey showers). Although temperature level control is much easier in hand-operated mixer kinds, they are much more expensive than the formerly pointed out mixers. They also call for extra plumbing of hot and cold water pipelines.

  • Thermostatic Mixer: The hose pipe and also spray of this shower kind are a part of the wall surface system and the cold and hot water materials are connected to a solitary valve below too. It is full with a built-in stabiliser to self-adjust the water temperature level as well as to prevent it from coming to be as well hot. One of the largest benefits of a thermostatic mixer shower type includes hassle-free temperature level control. Nonetheless, it is one of the most expensive of the various mixer options.

  • Power Shower: A power shower is a solitary system including an effective electrical pump that is capable of modifying both the water stress and temperature level. This kind of shower can be fitted if there is water supply from a cold water tank as well as a hot water cyndrical tube. A power shower makes the adjustment of both stress as well as temperature very easy. On the other hand, it is unsuitable for water warmed directly by the shower or where the water is supplied by a mix boiler under keys pressure.

  • Electric Shower: An electrical shower is plumbed into a keys cold water supply as well as it warms the water electrically. It is very important to note that for this shower kind to be installed, the keys pressure requires to be at least 0.7 kg/sq centimeters (10lb/sq in). The unit enables the temperature as well as pressure to be changed via a handle. Versions with temperature stabilisers are much better as they stay untouched by various other taps in other places in use within the family. A major disadvantage of electric showers is that the control knob just allows for the choice of high temperatures at less stress, or lower temperature levels at a greater pressure. This is bothersome in the winter season when the spray is usually weak and the keys water is chillier. Nevertheless, this trouble is tackled in some versions which are available with a winter/summer setting.


  • Approach


    Depending on the type of shower you wish to set up, the shower head have to either be fitted in order to avoid its contact with the water in the bathroom below or the base tray, or it should have a check shutoff.
    Before beginning, it is recommended to note the positions of the shower head as well as control, and also to intend the pipe-work included. In addition, the drainage system to remove the waste water will certainly need to be intended. Both placements of the cable path as well as the shower button will additionally require to be considered if an instant or electric shower system is being mounted.
    Make use of the instruction guide offered with the shower system to fit the shower control.Before suitable the pipelines that will provide the water to the shower system, it is important to cut off the water system. In order to secure the pipelines, they need to be offered a waterproof covering as well as also fitted with isolating shutoffs. The pipelines can after that be hidden right into the wall surface and also smudged over to neaten the overall look.
    Fit the base tray, shower head, and fittings.
    Connect the main shower control to the pipes that will be supplying the water (This may require a female screw thread adapter).
    Reconnect the water supply and test the pipelines for any kind of leakages, as some may need tightening.
    If you are installing an electrical shower, remember to switch off the electrical power supply prior to making any electric links. As soon as these connections have been made (there must be advice within the user's manual), the power supply can be switched back on.

    Adjusting Water Pressure to Suit Your Shower


    The cold water reservoir can be lifted to a greater height (in some cases just 150mm (6inches)) by fitting a solid wooden assistance below it - potentially composed of struts and blockboards. If you pick this alternative, the major and also circulation pipelines will certainly additionally need to be increased to satisfy the brand-new height of the tank.
    Additionally, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is chosen, it must be connected right into the power supply in order to run.

    Piping and also Water drainage


    It is best to use 15mm diameter supply pipelines, and also make the go to the shower as short and straight as possible so as to keep optimal stress as well as minimise warmth loss. Furthermore, by minimising the use of arm joints for pipe edges, you can reduce the resistance in the flow of the water. You can accomplish this by bending the pipelines instead.

    Most Typical Mistakes


  • Going against or neglecting local code limitations.

  • Using pipelines that are as well tiny.

  • Connecting copper to galvanized without using a brass or dielectric suitable in between the two.

  • Not making use of tape or pipe compound at threaded joints.

  • Uneven your components when installing them.

  • Not setting up an air gap filling up for fixtures.

  • Reducing supply stub outs too brief to install the shutoff valves onto after the ended up wall remains in place.

  • Not appropriately aligning tubes into installations or quit valves. (Compeling the nut onto the compression ring at an angle when the tubing is at an angle will certainly create a leak.).

  • When turning the water back on in your house, constantly run the outside hose pipe shutoff or purge your toilets to bleed dirt as well as air from the lines. This particles can trigger troubles in your sink faucets as well as various other plumbing trim.



  • Shower enclosures for bathrooms


    It makes your bathroom look like a luxury suite:


    Installing a new shower cubicle in your bathroom is an excellent way to make it look like a luxury suite. Nothing says modern elegance like a glass shower enclosure. Made with 8 mm easy clean glass, Jauqar shower enclosures come in varied colors and sizes to fit perfectly with your existing bathroom size & decor. The high-quality enclosures come with concealed fixings and silent cushion closing to ensure a great showering experience.


    Adds style to your bathroom:


    Shower cubicles are one of those shower products that can make your bathroom look modern, wide, and visually appealing. Jaquar shower enclosures are available in various styles, so you can find the one that fits your bathroom's overall design. Whether you prefer rectangular enclosures or fancy curved designs, Jaquar has it all.


    Enhances Personal Hygiene:


    Waking up in the morning to a filthy, muddy bathroom can ruin your day. Jaquar shower enclosure helps keep your bathroom clean and hygienic. A shower enclosure helps keep the water inside and off your bathroom flooring. Allowing water to spill out on a hard surface can lead to mold, mildew, and build-up on the tiles and other flooring surfaces, which can be unhygienic and unattractive.



    As all Jaquar shower enclosures are built to conform to the highest safety standards, you can be rest assured that they are completely watertight. This means you won't have to worry about leakages damaging your bathroom floor or ceiling—or worse yet, creating mold and mildew.


    Elevates your shower experience:


    A great shower combines many factors - optimum water pressure, apt water temperature, and great aesthetics during and after the shower. After all, who loves to clean the dirty floor just after a relaxing shower? With Jaquar shower enclosures, you can improve your experience by keeping the water within a specific area, so there is no cleaning post your shower. Offering style and function, our shower enclosures make your everyday life easier.


    Space-effective:


    Shower enclosures give you more space without sacrificing style. It can be a challenge finding both in today's modern bathroom, but a Jaquar shower enclosure will provide you with both. Unlike big, bulky shower enclosures, Jaquar's shower enclosures come in standard sizes that are good enough to fit any space- from large bathrooms with walk-in closets to bathrooms that need extra storage space. You can also customize the size as per your preference.


    Ensures safety with impressive safety features:


    Jaquar shower enclosures are designed with the highest safety standards. They come in different sizes and designs, along with toughened safety glass, high-quality hinges, and locking mechanisms that help keep you safe from injury while allowing you to feel at ease when taking a relaxing shower. A secure enclosure means no chance of slipping on wet bathroom floors.

    https://www.jaquar.org.uk/blog/why-shower-enclosure-are-important


    How to Install a One-Piece Shower Unit

    Hopefully you enjoyed our section about Simple ways to Install a Shower Cubicle on Your Own. Thanks so much for taking a few minutes to read our short article. Do you know anybody else who is in the market for the topic? Do not hesitate to promote it. I am grateful for your time. Come back soon.




    Apply Now


    Leave a Reply

    Your email address will not be published. Required fields are marked *